Welcome to AR10T.com, the world's first forum dedicated to AR-10™ rifles .  We invite you to JOIN our friendly firearms enthusiast forum.

This is mine....... A 16 incher........

  • Posts: 3354
  • Thank you received: 547

Replied by Siscowet on topic This is mine....... A 16 incher........

Let me guess, it is a return of gun herpes. It has to be put in isolation for ten to twelve months except for trips to the range for a diagnostic checkup. Right MRraley?
10 years 11 months ago #24257

Please Log in or Create an account to join the conversation.

  • Posts: 2808
  • Thank you received: 175

Replied by Sharkey on topic This is mine....... A 16 incher........

I'm sure it's just a cold sore.... :laugh:
10 years 11 months ago #24299

Please Log in or Create an account to join the conversation.

  • Posts: 602
  • Thank you received: 62

Replied by magi on topic This is mine....... A 16 incher........


Your a prophet Sharkey.... I need a little check piece and something like a Leupold VX-R 1 to 4 or some both eyes open deal... It would be nice to put a light or laser on it too......
10 years 11 months ago #24334

Please Log in or Create an account to join the conversation.

  • Posts: 1785
  • Thank you received: 212

Replied by faawrenchbndr on topic This is mine....... A 16 incher........

What makes you think you need "a little cheek piece?"
NRA Life Member
USAF(ret)
10 years 11 months ago #24335

Please Log in or Create an account to join the conversation.

  • Posts: 3354
  • Thank you received: 547

Replied by Siscowet on topic This is mine....... A 16 incher........

:naughty: you guys are dangerous. I was very happy with my basic AR10, but listening to all of you, I am starting to think " Well, maybe I should get this, or that.....".
10 years 11 months ago #24338

Please Log in or Create an account to join the conversation.

  • Posts: 737
  • Thank you received: 153

Replied by mrraley on topic This is mine....... A 16 incher........

See this is why they call these things "Barbies" for men...

You can dress them up almost any way you like, and that is what makes it yours. :thumbs:
"Attack the issue NOT the individual"

“Fix the problem, DON’T affix the blame”

"Prosecute the position, NOT the person"
The following user(s) said Thank You: jtallen83
10 years 11 months ago #24342

Please Log in or Create an account to join the conversation.

  • Posts: 602
  • Thank you received: 62

Replied by magi on topic This is mine....... A 16 incher........


This is very funny..... I like this......
10 years 11 months ago #24346

Please Log in or Create an account to join the conversation.

  • Posts: 602
  • Thank you received: 62

Replied by magi on topic This is mine....... A 16 incher........


Well I notice on my SASS...... that i have the cheek piece elevated about a quarter of an inch... I'm thinking of using the same one piece Armalite scope mount on the carbine... But I'll wait and see before I do that........
10 years 11 months ago #24347

Please Log in or Create an account to join the conversation.

  • Posts: 1785
  • Thank you received: 212

Replied by faawrenchbndr on topic This is mine....... A 16 incher........

What scope are you planning on using? With the right mount or set of rings, you should not need any cheek riser.
NRA Life Member
USAF(ret)
10 years 11 months ago #24363

Please Log in or Create an account to join the conversation.

  • Posts: 2808
  • Thank you received: 175

Replied by Sharkey on topic This is mine....... A 16 incher........

Wrencher has a point there. I needed one because I have the fixed carry handles on mine but if you have a flat top, it would probably be a simple matter of finding just the right rings.

Of course, if you have a head shaped like an old steel 5 gallon diesel can, you might not even need one with the carry handle so ya know, it's a try it out first kinda thing... :laugh:
10 years 11 months ago #24368

Please Log in or Create an account to join the conversation.

Show 'em Off!

Add your rifle to the AR-10 Photo Thread!