Welcome to AR10T.com, the world's first forum dedicated to AR-10™ rifles .  We invite you to JOIN our friendly firearms enthusiast forum.

Disregard...

  • Posts: 402
  • Thank you received: 99

Disregard... was created by 10-76

...
The following user(s) said Thank You: mlotziii, 13fcolt, jtallen83, OleCowboy
Last edit: 10 years 3 months ago by 10-76.
11 years 3 weeks ago #22504

Please Log in or Create an account to join the conversation.

  • Posts: 2510
  • Thank you received: 529

Replied by OleCowboy on topic One of us here?

That was very informative. A MUST view whether you are a complete beginner or seasoned. Good overview. I could aways wish for more detail but that could be in another take.

Far easier than I would have ever thought...
11 years 3 weeks ago #22525

Please Log in or Create an account to join the conversation.

  • Posts: 1238
  • Thank you received: 171

Replied by 13fcolt on topic One of us here?

Good vid. but I got to point out NOT to do this kind of work with the magazine vise block like he used. I don't know how his barrel nut came off so easy, it's certainly not typical, but there is a risk of damage torquing on it unsupported like that. For a barrel change, upper receiver vise blocks should be used as a minimum.
ArmaLite Super SASS for sale W/ extras. PM for details.
The following user(s) said Thank You: jtallen83, OleCowboy
11 years 3 weeks ago #22527

Please Log in or Create an account to join the conversation.

  • Posts: 2510
  • Thank you received: 529

Replied by OleCowboy on topic One of us here?

Thanks on that, my guess is he is doing a lot with his weapons and as a result the bbl my have been on and off several times. Like you I noticed how little torque it needed.

That said do you use any lube on the bbl when you install? If so what kind, such as Hi-temp etc?
11 years 3 weeks ago #22528

Please Log in or Create an account to join the conversation.

  • Posts: 1238
  • Thank you received: 171

Replied by 13fcolt on topic One of us here?

I use mobil 1 synthetic grease or lithium grease, whichever is in reach when I realize I need grease. You should not be seeing temps high enough for anything high temp, unless you got full auto and shoot hotter than cherry red. I use the mobil 1 to seal exhaust manifolds instead of gaskets. When the manifolds come off, they still have a slick greasy varnish to them and on the heads, so it can handle at least that much abuse.
ArmaLite Super SASS for sale W/ extras. PM for details.
The following user(s) said Thank You: jtallen83
11 years 3 weeks ago #22529

Please Log in or Create an account to join the conversation.

  • Posts: 2510
  • Thank you received: 529

Replied by OleCowboy on topic One of us here?

I like it and will remember it...
11 years 3 weeks ago #22532

Please Log in or Create an account to join the conversation.

  • Posts: 1356
  • Thank you received: 132

Replied by mlotziii on topic One of us here?

nice video with lots of information. we need to recruit this guy to make more how to videos for folks.
11 years 3 weeks ago #22592

Please Log in or Create an account to join the conversation.

  • Posts: 1785
  • Thank you received: 212

Replied by faawrenchbndr on topic One of us here?

Not to be argumentative with those who like the video,.....but,
there is a great deal wrong with that video!

- The M1A he showed had a Springfield mount. He stated the rifle was not very accurate. Those mounts are known to loosen and shift.
- Springfield Gen 3 scope,......again, not great for accurate work.
- Securing the action with a magwell block
- Removes flash hider without barrel block
- States to use anti-seize
- Uses a hammer on the multi tool

Just a ton wrong with this......... Can not recommend this video for anyone!
About as wrong as three boys in a sleeping bag!
NRA Life Member
USAF(ret)
11 years 3 weeks ago #22595

Please Log in or Create an account to join the conversation.

  • Posts: 402
  • Thank you received: 99

Replied by 10-76 on topic One of us here?

...
Last edit: 10 years 3 months ago by 10-76.
11 years 3 weeks ago #22596

Please Log in or Create an account to join the conversation.

  • Posts: 1785
  • Thank you received: 212

Replied by faawrenchbndr on topic One of us here?

Good points made, but some of his "errors" are so great, that it could cost a novice a crap load of money when damaging a lower ot having a upper receiver fail a few years down the road due to corrosion from using graphite anti seize.

Not tryin to nit pick so much, just trying to identify he is passing along a CRAP LOAD of very poor info!
NRA Life Member
USAF(ret)
11 years 3 weeks ago #22600

Please Log in or Create an account to join the conversation.

Show 'em Off!

Add your rifle to the AR-10 Photo Thread!