Welcome to AR10T.com, the world's first forum dedicated to AR-10™ rifles .  We invite you to JOIN our friendly firearms enthusiast forum.

Special break-in considerations?

  • Posts: 21
  • Thank you received: 0

Special break-in considerations? was created by Louisiana Shooter

I ordered a Bushy .308 ORC today. Is anyone aware of any particular break-in considerations that I should be aware of?
13 years 10 months ago #4226

Please Log in or Create an account to join the conversation.

  • a Guest
  • a Guest's Avatar
  • Visitor
  • Visitor

Replied by a Guest on topic Re:Special break-in considerations?

Last edit: 13 years 10 months ago by a Guest.
13 years 10 months ago #4234

Please Log in or Create an account to join the conversation.

  • Posts: 2122
  • Thank you received: 102

Replied by BUILDING MY SASS on topic Re:Special break-in considerations?

Well LS, being you are the first person that I know of on two sites that is buying one,
I guess we will learn all that together... :lol: :dry:
but for now, I would say follow what your manual says...and use high end quality ammo...then you will get better precision out of it...then you can shoot the cheap stuff...good luck and I (I mean WE :lol: ) expect a full report on it...including pictures..
Good for you...
BMS
It is better to have and not need, than need and not have.

If you think it is time to bury your guns, it is time to dig them up....


"Fight back! Whenever you are offered violence, fight back! The aggressor does not fear the law, so he must be taught to fear you. Whatever the risk, and at whatever...
13 years 10 months ago #4235

Please Log in or Create an account to join the conversation.

  • Posts: 5
  • Thank you received: 0

Replied by Al Mack on topic Re:Special break-in considerations?

I just finished the break in on a LR-308. I started with normal break in fire 5 clean after each, fire 3 x 5 times clean after each 3, fire 5 x 5 times clean after each 5. I thought I was done, but the DPMS called for fire 10 x 10 clean after each 10. I did this and does this gun shoot, and cleaning is a snap. You should get instructions with your new gun follow them and you should get good service from your rifle.
13 years 10 months ago #4236

Please Log in or Create an account to join the conversation.

  • Posts: 21
  • Thank you received: 0

Replied by Louisiana Shooter on topic Re:Special break-in considerations?

It is my understanding that with it's .308, Bushmaster has simply become another way for DPMS to market their rifles in an "off the rack" configuration. It just happened to come off the rack with several features that I was looking for.
13 years 10 months ago #4244

Please Log in or Create an account to join the conversation.

  • a Guest
  • a Guest's Avatar
  • Visitor
  • Visitor

Replied by a Guest on topic Re:Special break-in considerations?

Last edit: 13 years 10 months ago by a Guest.
13 years 10 months ago #4246

Please Log in or Create an account to join the conversation.

  • Posts: 21
  • Thank you received: 0

Replied by Louisiana Shooter on topic Re:Special break-in considerations?

BUILDING MY SASS wrote:
I'll probably use some 150 gr. core-lokt bullets that I load over 48.8 grains of Win 748 into once fired LC brass that I get from Scharch using Federal Champion primers. My Springer Socom II reallly likes that load and I could luck out and have a recipe that works in both. It has worked well in Armalite's that students have brought to my classes, but I do not think it has been run through a DPMS pattern .308.
13 years 10 months ago #4253

Please Log in or Create an account to join the conversation.

  • Posts: 21
  • Thank you received: 0

Replied by Louisiana Shooter on topic Re:Special break-in considerations?

Well, the 12 pmqgs that I ordered from Midway are in and my dealer has my rifle, but I cannot pick it up because I got delayed again. Filled out the paperwork Tuesday and can pick up my rifle next Tuesday. Only the ATF and our .gov's infinite wisdom could make a 3 day waiting period last a week.
13 years 10 months ago #4266

Please Log in or Create an account to join the conversation.

  • Posts: 11
  • Thank you received: 0

Replied by LoneWolfUSMC on topic Re:Special break-in considerations?

My method....



Do what you want....but just make sure you know what you think you are trying to do.

Many of our break in processes are because that's what "grandpappy" used to do. Several barrel manufacturers post break in procedures because the customer thinks there should be one and gets upset when there isn't.

Clean, shoot, done.

More damage has been done by cleaning than by shooting.
Wherever - Whatever - However
8541tactical.com
Ammo Wallets and Databook Covers
__________________________________________
Twisted Views From My Little World
13 years 10 months ago #4288

Please Log in or Create an account to join the conversation.

  • Posts: 2122
  • Thank you received: 102

Replied by BUILDING MY SASS on topic Re:Special break-in considerations?

Ok here is another way, but it is more for the bolt actions...but it will work for the AR-10...
BMS

It is better to have and not need, than need and not have.

If you think it is time to bury your guns, it is time to dig them up....


"Fight back! Whenever you are offered violence, fight back! The aggressor does not fear the law, so he must be taught to fear you. Whatever the risk, and at whatever...
13 years 9 months ago #4298

Please Log in or Create an account to join the conversation.

Show 'em Off!

Add your rifle to the AR-10 Photo Thread!