Welcome to AR10T.com, the world's first forum dedicated to AR-10™ rifles .  We invite you to JOIN our friendly firearms enthusiast forum.

AR10 two stage trigger

  • Posts: 73
  • Thank you received: 8

Replied by Scaup58 on topic Re:AR10 two stage trigger

Tech note 78 describes Installation.
13 years 6 months ago #5674

Please Log in or Create an account to join the conversation.

  • Posts: 29
  • Thank you received: 0

Replied by Maestro Pistolero on topic Re:AR10 two stage trigger

Scaup58 wrote:Awesome. Thank you.
13 years 6 months ago #5675

Please Log in or Create an account to join the conversation.

  • Posts: 49
  • Thank you received: 0

Replied by lotoofla on topic Re:AR10 two stage trigger

:unsure: In terms of interchangeability yes for the most part they will work. However, AR 10's and the like need a heavyer hammer for reliable ignition of ALL primers. I tried using a Timney 3# trigger in my AR 10A2 with CCI's Mil Spec primers, and had a 10% fail to fire.
13 years 5 months ago #5782

Please Log in or Create an account to join the conversation.

  • Posts: 26
  • Thank you received: 1

Replied by madcratebuilder on topic Re: AR10 two stage trigger

This is a late reply but I want to add that the ArmaLite tac/nm two stage is the same design as the RRA toe stage. The ArmaLite has three notches added to the disco so you have three second stage weights just by a simple spring position change. Both these triggers are based on the M14 and are fairly easy to tune if you have had the training and/or experience. These fit the AR10 and 15.

This image is hidden for guests.
Please log in or register to see it.

12 years 10 months ago #7591

Please Log in or Create an account to join the conversation.

  • Posts: 41
  • Thank you received: 3

Replied by edritchey on topic Re: AR10 two stage trigger

I might have to upgrade to the NM armalite triger group.
12 years 10 months ago #7592

Please Log in or Create an account to join the conversation.

Show 'em Off!

Add your rifle to the AR-10 Photo Thread!